Bullet6 LED bulb 7 200LM/set – 9012

$ 49.99 before tax

  • Sold as a pair: Yes
  • Brightness in Lumens: 3 600LM/bulb
  • Brightness in Lumens Lux: Coming soon
  • Luminosity colour: 6 000K (Pure white)
  • LED chip brand: SEOUL-SZ8-Y11
  • Cooling system: Fan cooled
  • Material: Aviation grade aluminum 6063 all around
  • Bulb and driver: 1 piece
  • Plug&play: Yes
  • LED position: 180′ 2 sided
  • Twin side high and low simultaneously: N/A
  • Total LED quantity per bulb: 12x2w chip/single beam
  • Functional DRL: Yes (Depends on car makes)
  • Watt per bulb: 24W
  • Lifespan: 30 000 hours
  • Warranty: 1 years
  • Can-Bus system add on: Needed on all Chrysler, Dodge, Plymouth, Jeep vehicles. Ask us here!
Clear
Compare

Description

Does this fit my vehicle? Ask us here to find out

 Visit our Head to Head Battle Page to really find out how this bulb perform next to other headlight upgrades in true environments.

Introducing 8G LED bulb

Bullet6 LED bulb compact design will often fit where others won’t. At 6000K cold white, you won’t miss your old halogen bulbs. Fan cooled, it uses aluminum material from top to bottom with a strip silicone around the head.
 
Combined state of the art materials and quality assembly, the Bullet is 24w per bulb that rates its Lumen peak a  7200LM/set without compromising oncoming traffic visibility. This is a fine low budget upgrade or for the ones that are concerned about incoming traffic glare. 
{

9012 bulb made specially for projector headlights

The head shape of this bulb being so thin and fan size compact enough to fit most projector headlight (exept aftermarket in some cases) provides great beam pattern and descent lumen lux combination. The LED chip should be aiming on the sides in the housing for proper beam pattern.

 
RemT Certified’s basic solid 1 year warranty against defects at no cost guarantees a stress free experience to our dear customers.

Vehicles using high beam as DRL

  • Vehicles using high beam as DRL often need a PWM modules to stop the flickering when used on the “AUTO” mode during daylight such as Toyota’s to name only one.
  • This isn’t a decoder/can-bus. It only serves the purpose of boosting the power sent to the LED chips because when the light is used as a DRL, the vehicle only sends 50% of the available power to deem the light.


Instructions

Ensure no contact with hard surface against LED chip. Any micro scratches will reduce its lifespan. Keep clean. Avoid touching LED chip with bare hands.
 
Once ready to install the new Bullet6 bulb into headlight/fog housing, inspect from the front of vehicle, looking into the headlight, and check for bulb position. This LED should ALWAYS be pointed left and right.
 
If headlights housing is inclosed with a dust cap, simply place the drive box inside. If not inclosed, zip tie the driver against any fix parts near to avoid extreme rattling.
 
How to adjust your bulbs: Read more
Please follow and like us:
error

Additional information

Select bulb

9006/HB4, 9012

Reviews

There are no reviews yet.

Be the first to review “Bullet6 LED bulb 7 200LM/set – 9012”

Your email address will not be published. Required fields are marked *

QR Code

QR Code